Laying out plans now to come up with specs for a suitable cam for this engine.
The SU (Skinners Union UK) carbs viewtopic.php?f=1&t=59225&p=838978&hili ... ce#p838978 which are going to be used on this engine are noted for not liking a lot of overlap. Although, we haven't been able to find any published information covering how much cam overlap a racing engine with these carbs can tolerate.
Looking for any information on the subject anyone knows of or can point us to.
Component Advice for a Vintage Racing Engine
Moderator: Team
- Vintagewrench
- Member
- Posts: 51
- Joined: Tue Nov 05, 2019 1:45 pm
- Location:
Re: Component Advice for a Vintage Racing Engine
The Old Motor
Prewar Racing Engine Rebuilding - Reproduction Engine Blocks, Heads, Crankcases - Custom-Made Bearings - Babbitting - Blind-Hole Cylinder Boring - Line boring - Connecting Rod Boring - theoldmotor.com/?page_id=29926
Prewar Racing Engine Rebuilding - Reproduction Engine Blocks, Heads, Crankcases - Custom-Made Bearings - Babbitting - Blind-Hole Cylinder Boring - Line boring - Connecting Rod Boring - theoldmotor.com/?page_id=29926
Re: Component Advice for a Vintage Racing Engine
SU carburetters tuning tips by G. Wade has good info, ISBN# 9781855202559
-
- Expert
- Posts: 776
- Joined: Mon Nov 26, 2007 11:44 pm
- Location:
Re: Component Advice for a Vintage Racing Engine
I wonder if you could phone Wayne Carrinie chasing Classic Cars.
- Vintagewrench
- Member
- Posts: 51
- Joined: Tue Nov 05, 2019 1:45 pm
- Location:
Re: Component Advice for a Vintage Racing Engine
Thanks for the reference to Wade's SU book! The more up to date SU book by Des Hammill is in the mail and hopefully has the info, if not Wade's book will be next.
The Old Motor
Prewar Racing Engine Rebuilding - Reproduction Engine Blocks, Heads, Crankcases - Custom-Made Bearings - Babbitting - Blind-Hole Cylinder Boring - Line boring - Connecting Rod Boring - theoldmotor.com/?page_id=29926
Prewar Racing Engine Rebuilding - Reproduction Engine Blocks, Heads, Crankcases - Custom-Made Bearings - Babbitting - Blind-Hole Cylinder Boring - Line boring - Connecting Rod Boring - theoldmotor.com/?page_id=29926
-
- HotPass
- Posts: 14
- Joined: Fri May 09, 2014 2:57 am
- Location:
- Vintagewrench
- Member
- Posts: 51
- Joined: Tue Nov 05, 2019 1:45 pm
- Location:
Re: Component Advice for a Vintage Racing Engine
Thanks Steve, that's exactly what we are doing along with other mods to take advantage of the more developed velocity stack like horn on the air intake of the HIF carbs.
The Old Motor
Prewar Racing Engine Rebuilding - Reproduction Engine Blocks, Heads, Crankcases - Custom-Made Bearings - Babbitting - Blind-Hole Cylinder Boring - Line boring - Connecting Rod Boring - theoldmotor.com/?page_id=29926
Prewar Racing Engine Rebuilding - Reproduction Engine Blocks, Heads, Crankcases - Custom-Made Bearings - Babbitting - Blind-Hole Cylinder Boring - Line boring - Connecting Rod Boring - theoldmotor.com/?page_id=29926