stainless steel bellmouths sources

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
inline__engine
Member
Member
Posts: 71
Joined: Mon May 30, 2016 3:03 am
Location:

stainless steel bellmouths sources

Post by inline__engine »

Does anyone know where i can get stainless steel bellmouths or similar radius transitions for pressure wave termination box?
tenxal
Expert
Expert
Posts: 804
Joined: Sun Nov 17, 2013 8:48 pm
Location:

Re: stainless steel bellmouths sources

Post by tenxal »

inline__engine
Member
Member
Posts: 71
Joined: Mon May 30, 2016 3:03 am
Location:

Re: stainless steel bellmouths sources

Post by inline__engine »

yeah i've seen those but they don't function as a good bellmouth
User avatar
MadBill
Guru
Guru
Posts: 15024
Joined: Tue Nov 15, 2005 10:41 am
Location: The Great White North

Re: stainless steel bellmouths sources

Post by MadBill »

So, like these, but perhaps 3" or so diameter? https://www.ebay.com/itm/Torque-Cones-P ... 1711896749
Felix, qui potuit rerum cognscere causas.

Happy is he who can discover the cause of things.
jacksoni
Guru
Guru
Posts: 1074
Joined: Sat Dec 18, 2004 2:54 pm
Location: Maryland

Re: stainless steel bellmouths sources

Post by jacksoni »

Momus
Pro
Pro
Posts: 307
Joined: Tue Aug 13, 2013 8:38 am
Location:

Re: stainless steel bellmouths sources

Post by Momus »

I've made many bell mouths using a steel die that is the male form of the tube end you want on an arbor press.

The radius needs to be about 150 to 180 degrees and you need a push end plug.
Post Reply