Speed-Talk is running on www.Speed-Talk.com

IMPORTANT: Update your bookmarks to https://www.speed-talk.com/forum/
(Right-click the URL and select "Bookmark this link")

Don't know where to put this?

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
pdq67
Guru
Guru
Posts: 9779
Joined: Thu Mar 04, 2010 8:05 pm
Location:

Don't know where to put this?

Post by pdq67 »

Where is the VIN at on the complete drivetrain cradle for a 2004 Buick La Sabre car.

I suppose GM would have stamped it on both the engine as well as the transaxle..

Right, but where?

I know my '67 Camaro had it on the little pad on the block as well as at several other places on my car.

pdq67
dannobee
HotPass
HotPass
Posts: 314
Joined: Mon Nov 04, 2019 9:01 pm
Location:

Re: Don't know where to put this?

Post by dannobee »

Engine:
Primary location is near the oil pan rail, next to the starter.
Secondary location is below the water pump, near the A/C compressor.

Transmission:
Goodwrench Tag Location: Metal tag riveted to the transmission case, near the RH output shaft housing.
VIN derivative stamping location: Near the oil pan rail, below the metal tag mentioned above.
Secondary VIN location: Near the bellhousing area, LH side, near the engine to transmission mounting bolts.
pdq67
Guru
Guru
Posts: 9779
Joined: Thu Mar 04, 2010 8:05 pm
Location:

Re: Don't know where to put this?

Post by pdq67 »

^^^^^^^^^^^^^^^^

Thanks dannobee.

Now to crawl under it..

pdq67
Post Reply