Page 1 of 1

Don't know where to put this?

Posted: Sat Feb 08, 2020 2:06 pm
by pdq67
Where is the VIN at on the complete drivetrain cradle for a 2004 Buick La Sabre car.

I suppose GM would have stamped it on both the engine as well as the transaxle..

Right, but where?

I know my '67 Camaro had it on the little pad on the block as well as at several other places on my car.

pdq67

Re: Don't know where to put this?

Posted: Sat Feb 08, 2020 3:05 pm
by dannobee
Engine:
Primary location is near the oil pan rail, next to the starter.
Secondary location is below the water pump, near the A/C compressor.

Transmission:
Goodwrench Tag Location: Metal tag riveted to the transmission case, near the RH output shaft housing.
VIN derivative stamping location: Near the oil pan rail, below the metal tag mentioned above.
Secondary VIN location: Near the bellhousing area, LH side, near the engine to transmission mounting bolts.

Re: Don't know where to put this?

Posted: Sun Feb 09, 2020 2:49 pm
by pdq67
^^^^^^^^^^^^^^^^

Thanks dannobee.

Now to crawl under it..

pdq67