Speed-Talk is running on www.Speed-Talk.com

IMPORTANT: Update your bookmarks to https://www.speed-talk.com/forum/
(Right-click the URL and select "Bookmark this link")

Crank scraper maybe little too tight?

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
User avatar
ptuomov
HotPass
HotPass
Posts: 2982
Joined: Fri Aug 07, 2009 3:52 am
Location:

Crank scraper maybe little too tight?

Post by ptuomov »

The windage trays maybe a little tight in this engine?
F6496C23-D7C0-4B45-910B-B11D8809EEEE.jpeg
You do not have the required permissions to view the files attached to this post.
Paradigms often shift without the clutch -- https://www.youtube.com/watch?v=cxn-LxwsrnU
https://www.instagram.com/ptuomov/
Put Search Keywords Here
Kevin Johnson
HotPass
HotPass
Posts: 9027
Joined: Tue Nov 22, 2005 5:41 am
Location:

Re: Crank scraper maybe little too tight?

Post by Kevin Johnson »

Trim back the drawer handles a little. Should be fine.
User avatar
af2
HotPass
HotPass
Posts: 6658
Joined: Sun Jan 28, 2007 4:42 pm
Location: Grass Valley, CA :Northern Foothills

Re: Crank scraper maybe little too tight?

Post by af2 »

Self clearance?
GURU is only a name.
Adam
User avatar
Dave Koehler
Vendor
Posts: 6465
Joined: Mon Oct 04, 2004 11:19 pm
Location: Urbana, IL USA
Contact:

Re: Crank scraper maybe little too tight?

Post by Dave Koehler »

Just to cover the bases did you have the rods resized lately?
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
User avatar
ptuomov
HotPass
HotPass
Posts: 2982
Joined: Fri Aug 07, 2009 3:52 am
Location:

Re: Crank scraper maybe little too tight?

Post by ptuomov »

Dave Koehler wrote: Sun Feb 09, 2020 8:37 pm Just to cover the bases did you have the rods resized lately?
Yep, those were rebuilt. I don’t recall those marks after the rods were rebuilt, but that doesn’t mean anything.
Paradigms often shift without the clutch -- https://www.youtube.com/watch?v=cxn-LxwsrnU
https://www.instagram.com/ptuomov/
Put Search Keywords Here
User avatar
Dave Koehler
Vendor
Posts: 6465
Joined: Mon Oct 04, 2004 11:19 pm
Location: Urbana, IL USA
Contact:

Re: Crank scraper maybe little too tight?

Post by Dave Koehler »

ptuomov wrote: Sun Feb 09, 2020 8:40 pm
Dave Koehler wrote: Sun Feb 09, 2020 8:37 pm Just to cover the bases did you have the rods resized lately?
Yep, those were rebuilt. I don’t recall those marks after the rods were rebuilt, but that doesn’t mean anything.
I think you will find all the rods have that rub mark.
Plus your scraper is cut to clear the big end of the rod is it not?
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
User avatar
ptuomov
HotPass
HotPass
Posts: 2982
Joined: Fri Aug 07, 2009 3:52 am
Location:

Re: Crank scraper maybe little too tight?

Post by ptuomov »

Dave Koehler wrote: Sun Feb 09, 2020 8:49 pm
ptuomov wrote: Sun Feb 09, 2020 8:40 pm
Dave Koehler wrote: Sun Feb 09, 2020 8:37 pm Just to cover the bases did you have the rods resized lately?
Yep, those were rebuilt. I don’t recall those marks after the rods were rebuilt, but that doesn’t mean anything.
I think you will find all the rods have that rub mark.
Plus your scraper is cut to clear the big end of the rod is it not?
Yes. The marks were a mystery to me, but if they came from resizing the rods then that’s a logical explanation. I threw out the windage tray hypothesis, even though the geometry doesn’t really make that explanation terribly likely.
Paradigms often shift without the clutch -- https://www.youtube.com/watch?v=cxn-LxwsrnU
https://www.instagram.com/ptuomov/
Put Search Keywords Here
User avatar
ptuomov
HotPass
HotPass
Posts: 2982
Joined: Fri Aug 07, 2009 3:52 am
Location:

Re: Crank scraper maybe little too tight?

Post by ptuomov »

Kevin Johnson wrote: Sun Feb 09, 2020 8:25 pm Trim back the drawer handles a little. Should be fine.
I think the scraper/windage tray sheets clear the big end, where the geometry is tighter.
Paradigms often shift without the clutch -- https://www.youtube.com/watch?v=cxn-LxwsrnU
https://www.instagram.com/ptuomov/
Put Search Keywords Here
SupStk
Guru
Guru
Posts: 1664
Joined: Wed Jun 22, 2005 6:25 pm
Location: Box Elder, SD

Re: Crank scraper maybe little too tight?

Post by SupStk »

af2 wrote: Sun Feb 09, 2020 8:26 pmSelf clearance?

That would be my guess too. From the marks, I'd say both end of the rods were sized.

That isn't the part of the rod that's closest to a windage tray or scraper.
Monty Frerichs
B&M Machine
User avatar
ptuomov
HotPass
HotPass
Posts: 2982
Joined: Fri Aug 07, 2009 3:52 am
Location:

Re: Crank scraper maybe little too tight?

Post by ptuomov »

SupStk wrote: Mon Feb 10, 2020 1:00 pm
That would be my guess too. From the marks, I'd say both end of the rods were sized.

That isn't the part of the rod that's closest to a windage tray or scraper.
That’s where the marks came from, so mystery is solved. Windage tray comment was just for fun, they obviously can’t touch the rod so high up.
Paradigms often shift without the clutch -- https://www.youtube.com/watch?v=cxn-LxwsrnU
https://www.instagram.com/ptuomov/
Put Search Keywords Here
Dan Timberlake
Guru
Guru
Posts: 1530
Joined: Tue Jan 15, 2013 8:10 pm
Location:

Re: Crank scraper maybe little too tight?

Post by Dan Timberlake »

As others said -
https://www.statesidetuning.co.uk/machining/rods2.JPG

Honing pin bushings is not my favorite, except for tweaking clearance after rod straightness is measured and confirmed satisfactory.
Post Reply