454 engine noise
Moderator: Team
-
- New Member
- Posts: 44
- Joined: Sat Aug 15, 2015 10:49 am
- Location:
454 engine noise
I have a 454 with a rotating chirping noise inside the motor . It takes about 4 minutes to show up when starting ! Motor is a fresh rebuild ! The noise can be heard in the intake , heads an block area very pronounced ! Any body come a cross this before need insight. Thanks
-
- Guru
- Posts: 2151
- Joined: Fri Apr 07, 2006 8:23 pm
- Location:
Re: 454 engine noise
I’ve experienced a “chirping “ engine upon disassembly show major main bearing damage. Roller lifters, rockers etc can all present with that noise. Pretty good chance you’re going back inside to investigate.
- mt-engines
- Expert
- Posts: 880
- Joined: Fri Sep 27, 2019 12:35 pm
- Location: MN
Re: 454 engine noise
I've heard roller lifters make that noise, can bearings make that noise, thrust bearing.. And I've also heard exhaust make that noise.
My advice, pull the filter, cut it. Check the lash etc.
My advice, pull the filter, cut it. Check the lash etc.
Re: 454 engine noise
Is it crank speed or cam speed? Believe it or not, I've personally heard valve stem seals make that noise, but obviously cam speed.
-
- New Member
- Posts: 44
- Joined: Sat Aug 15, 2015 10:49 am
- Location:
-
- Guru
- Posts: 1264
- Joined: Fri Feb 26, 2010 11:15 am
- Location: Gold Canyon, AZ
Re: 454 engine noise
Vacuum leak under carburetor sometimes sounds like a chirp. Check carb to manifold gaskets.
Bill
Perfect Circle Doctor of Motors certification
SAE Member (30 years)
ASE Master Certified Engine Machinist (+ two otherASE Master Certifications)
AERA Certified Professional Engine Machinist
Perfect Circle Doctor of Motors certification
SAE Member (30 years)
ASE Master Certified Engine Machinist (+ two otherASE Master Certifications)
AERA Certified Professional Engine Machinist
-
- Pro
- Posts: 461
- Joined: Sun Feb 13, 2005 11:27 am
- Location: