427 bbc rotating weight
Moderator: Team
-
- Expert
- Posts: 859
- Joined: Mon Oct 21, 2013 8:48 pm
- Location:
427 bbc rotating weight
About what did the oem 427 BBC pistons, pins, rods, crankshaft weigh individualy.
-
- Guru
- Posts: 2151
- Joined: Fri Apr 07, 2006 8:23 pm
- Location:
Re: 427 bbc rotating weight
Off the cuff, OEM, pistons close to 2 pounds, rods about 1.75 pounds, crank in the 70 to 75 pound range. Heavy stuff.
-
- Expert
- Posts: 859
- Joined: Mon Oct 21, 2013 8:48 pm
- Location:
Re: 427 bbc rotating weight
Thanks mostly wondering what the forged pistons and the pins weighed in grams. No doubt some differences in types of pistons/domes. Easy to find the piston pin was .990 dia. But what was the length.
-
- Guru
- Posts: 2151
- Joined: Fri Apr 07, 2006 8:23 pm
- Location:
Re: 427 bbc rotating weight
Been a few years since I’ve balanced, but 850 to 900 grams for piston and pin would be close. (454 grams in a pound)
-
- Expert
- Posts: 859
- Joined: Mon Oct 21, 2013 8:48 pm
- Location:
Re: 427 bbc rotating weight
Lol. So even a stock heavy as hell forged 302 chevy piston really light by comparison.
- Dave Koehler
- Vendor
- Posts: 7205
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Re: 427 bbc rotating weight
Of course it is.
If you only want light build a motorcycle engine.
If you only want light build a motorcycle engine.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
-
- Expert
- Posts: 859
- Joined: Mon Oct 21, 2013 8:48 pm
- Location:
Re: 427 bbc rotating weight
Im trying to take weight off a motorcycle as you speak. It would take changes to the crank and custom pistons. But how about howards 6.5 length ultra billet sbc rod and have light pistons made up to use SBC piston pins.
-
- New Member
- Posts: 10
- Joined: Mon May 14, 2007 11:35 pm
- Location:
- Dave Koehler
- Vendor
- Posts: 7205
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Re: 427 bbc rotating weight
It is time for you to stop dancing around tell us exactly what it is you want to do.Little Mouse wrote: ↑Fri May 08, 2020 8:14 pm Im trying to take weight off a motorcycle as you speak. It would take changes to the crank and custom pistons. But how about howards 6.5 length ultra billet sbc rod and have light pistons made up to use SBC piston pins.
If you are just throwing things out there to see what sticks you need to stop that. It's an aggravating black hole.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
-
- Expert
- Posts: 859
- Joined: Mon Oct 21, 2013 8:48 pm
- Location:
Re: 427 bbc rotating weight
Im leaning torward building a bbc with a factory block somewhere in the .060 over to .090 over with a 3.76 stroke. Would be small by todays builds. Ill use longer rods. I have no doubt sbc rods have been used before not willing to use aluminum rods.
- Dave Koehler
- Vendor
- Posts: 7205
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Re: 427 bbc rotating weight
Build it with BB parts and be done with it.
What you think you want is only suitable for a high winding, light weight Comp Eliminator type car. Been there.
What you think you want is only suitable for a high winding, light weight Comp Eliminator type car. Been there.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
-
- Expert
- Posts: 859
- Joined: Mon Oct 21, 2013 8:48 pm
- Location:
Re: 427 bbc rotating weight
Done that in a couple BBC. How much more expensive do custom pistons generally cost. I will use a 22 lb steel flywheel. The howards rods are $830.00 maybe someone like ohio crank could do the crank at some resonable price. Besides the smaller dia. rod pin can a regular forging they start out with be machined for the the narrower big ends of the rods ?
- Dave Koehler
- Vendor
- Posts: 7205
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Re: 427 bbc rotating weight
You have done this before?
So why all the wandering questions?
If you are building a high rpm comp engine then the word reasonable does not apply.
So why all the wandering questions?
If you are building a high rpm comp engine then the word reasonable does not apply.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
-
- Expert
- Posts: 859
- Joined: Mon Oct 21, 2013 8:48 pm
- Location:
Re: 427 bbc rotating weight
No. But if a regular forged crank like a $900 ohio crankshaft could be just machined for the rods and some more charge in cost would do it even if pistons cost me twice as much. Never talked to anyone about custom pistons except for a motorcycle. Seems a comp engine would just use aluminum rods.
Re: 427 bbc rotating weight
What is your RPM goal? It sounds like you are looking for a particular RPM limit, rather than a HP or torque goal. If you want to rev it, then use a good forged 427 crank, scat rods a nice light piston and call Mike for valvetrain parts and recommendations. Put what ever heads you decide on and shift when the light turns on. There you have it. Enjoy.
Paul
Paul
"It's a fine line between clever and stupid." David St. Hubbins