Milling a -206 BBC head?

[pdq67]

Be aware that that EQ head is a milled down 64cc head. ir will have the same issues VTP clearance, manifold fit, pushrod length, Dizzy fit.

U gonna finish that lil motor in this lifetime.

Onna these days IF I don't die first, I will find out when I put my 325" SBC together.

4.155" b x 3.00" s engine.

As for domes, my 496 has ROSS about .090" tall dome forged pistons in it along with the cast-iron Merlin open chambered big valve heads and shim head gaskets.

I told them all this as well as a stock DITH piston measurement and they are what they sold me to make an about 9.5 to 1 cr., 496 engine.

pdq67

PS., I am a big fan of small chamber heads, flat-top pistons, and minimal/low domes to end up with a cr. in the street/pump gas engine range!!