Onna these days IF I don't die first, I will find out when I put my 325" SBC together.
4.155" b x 3.00" s engine.
As for domes, my 496 has ROSS about .090" tall dome forged pistons in it along with the cast-iron Merlin open chambered big valve heads and shim head gaskets.
I told them all this as well as a stock DITH piston measurement and they are what they sold me to make an about 9.5 to 1 cr., 496 engine.
pdq67
PS., I am a big fan of small chamber heads, flat-top pistons, and minimal/low domes to end up with a cr. in the street/pump gas engine range!!