Need a machine shop close to northeast Arkansas, any recommendations?

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
Bwh998
Member
Member
Posts: 70
Joined: Tue Feb 18, 2020 5:12 pm
Location: Arkansas

Need a machine shop close to northeast Arkansas, any recommendations?

Post by Bwh998 »

Pulled the heads last night and the bores are a little rough, going to need to go another .010-.020 over and have it decked.
Top
ijames
Expert
Expert
Posts: 850
Joined: Fri Jul 04, 2008 3:44 pm
Location: Laurel, MD

Re: Need a machine shop close to northeast Arkansas, any recommendations?

Post by ijames »

I believe that member dwilliams is in NE Arkansas, send him a pm and see if he can recommend someone.
Carl Ijames, chemist not engine builder
carl ddott ijames aatt verizon ddott net
Top
pdq67
Guru
Guru
Posts: 9841
Joined: Thu Mar 04, 2010 8:05 pm
Location:

Re: Need a machine shop close to northeast Arkansas, any recommendations?

Post by pdq67 »

NE Arkansas, does for Ste. Genevieve, MO, have a good shop?

Not too far away and it should be a lot bigger town, imho...

pdq67
Top
Bill Chase
HotPass
HotPass
Posts: 458
Joined: Tue Aug 27, 2019 1:11 pm
Location: Michigan

Re: Need a machine shop close to northeast Arkansas, any recommendations?

Post by Bill Chase »

How far from mena or Memphis are you? Seems like you'd have no trouble finding a shop within a couple hours drive northeast toward Memphis or st Louis?
Top
JRice
Member
Member
Posts: 145
Joined: Mon Nov 05, 2012 11:14 pm
Location:

Re: Need a machine shop close to northeast Arkansas, any recommendations?

Post by JRice »

I’m in Northwest Arkansas I can help you out.
Rice Performance & Machining
Top
Post Reply

Return to “Engine Tech”