Min. CSA

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
Outlaw383
New Member
New Member
Posts: 45
Joined: Wed Jul 17, 2019 2:56 pm
Location:

Min. CSA

Post by Outlaw383 »

Hey guys would any of you happen to have the CSA for Dart cnc 227 heads?

Thanks
Chris
Top
Outlaw383
New Member
New Member
Posts: 45
Joined: Wed Jul 17, 2019 2:56 pm
Location:

Re: Min. CSA

Post by Outlaw383 »

Ok what would be the minimum csa needed
For a bore of 4.165 and a stroke of 3.35 with a max rpm of 8,000 ?
Top
steve cowan
Guru
Guru
Posts: 2275
Joined: Wed Jul 27, 2011 5:22 am
Location: brisbane AUSTRALIA

Re: Min. CSA

Post by steve cowan »

My approx calculation is around 2.7" average csa
steve c
"Pretty don't make power"
Top
Outlaw383
New Member
New Member
Posts: 45
Joined: Wed Jul 17, 2019 2:56 pm
Location:

Re: Min. CSA

Post by Outlaw383 »

Thank you for your response Steve. Very much appreciated sir.

Chris
Top
steve cowan
Guru
Guru
Posts: 2275
Joined: Wed Jul 27, 2011 5:22 am
Location: brisbane AUSTRALIA

Re: Min. CSA

Post by steve cowan »

Chris,
What are you working on and what application. :D
steve c
"Pretty don't make power"
Top
Outlaw383
New Member
New Member
Posts: 45
Joined: Wed Jul 17, 2019 2:56 pm
Location:

Re: Min. CSA

Post by Outlaw383 »

Looking at some different combinations for some asphalt circle track engines.

Chris
Top
Post Reply

Return to “Engine Tech”