We are currently running on the new domain and server: www.Speed-Talk.com

IMPORTANT: Update your bookmarks to https://www.speed-talk.com/forum/
(Right-click the URL and select "Bookmark this link")

Mystery

General engine tech -- Drag Racing to Circle Track

Moderator: Team

fishman
Expert
Expert
Posts: 788
Joined: Sat Oct 14, 2006 9:02 pm
Location: Qualicum Beach British Columbia Canada

Re: Mystery

Post by fishman » Thu Jul 30, 2020 3:06 pm

Update
Sent torque into get checked, he phoned me back and told me torque was fine but found silver metal filings in the torque .
I hauled the tranny out to the bench and first I did was inspect the input shaft. Right away I noticed on the input shaft on the end by the oil hole closest to the torque that a partial black ring on the input shaft and also grooves on the shaft, so I’m guessing that is where the metal was coming from the input shaft. The input shaft is like 16 years old and probably 4340 not like the new 300m. I rolled it on a table but hard to tell if it bent, but obviously something is wrong . I’m looking for some ideas on this issue and how to tell if bent. Thanks
[IMG]http://i44.photobucket.com/albums/f29/fishman1/S7300198-1.jpg[/IMG]

Post Reply