Hello Everyone,
On a small block ford factory roller block....Can you use a .750” wheel hydraulic roller lifter on a cam that was designed for a .700” wheel ?
If so, what happens to the cam timing, lift etc ?
Thanks
SBF Hydraulic Roller Lifters
Moderator: Team
-
- Guru
- Posts: 6386
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: SBF Hydraulic Roller Lifters
Yes, you can. The valve timing will get very slightly more aggressive as it will be the same off the seat and a few degrees more while on the flank of the cam.
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.