Found this interesting..........
2600+ 1/8 mile passes on this BAM .904" BB1 steel bushed DLC roller lifters
375lbs seat/ 1200lbs open spring pressure.
The lifters were stripped for inspection to find no visible bush wear. The lifters were re-assembled and put back in the engine. BAM solid steel DLC
https://scontent.fmel6-1.fna.fbcdn.net/ ... e=5F75DA57
What's everone's thoughts?
BAM bushed lifters!
Moderator: Team
-
- Pro
- Posts: 325
- Joined: Sun May 24, 2015 11:50 pm
- Location:
Re: BAM bushed lifters!
High quality metal, body and paint work
http://www.spiuserforum.com/index.php?t ... inia.9030/
http://www.spiuserforum.com/index.php?t ... inia.9030/
Re: BAM bushed lifters!
Just thought 2600 passes @375lbs seat/ 1200lbs open spring pressure was good going and they looked like that after tear down impressive.
-
- Guru
- Posts: 1259
- Joined: Fri Jan 25, 2008 6:37 am
- Location: New Zealand
Re: BAM bushed lifters!
They were 1/8 mile passes. Still, thats a hell of a lot of meetings when you work it out. They definetley were old lifters.