Page 1 of 1
350/383 marine scropion cams
Posted: Tue Oct 13, 2020 4:52 pm
by jred
looking to see if somebody has the spec's on this cam ,, I have 1 apart for a long time and have mixed the cam up with some stock vortec rollers I can't seen to find the difference thanks for any help on this
Re: 350/383 marine scropion cams
Posted: Tue Oct 13, 2020 5:14 pm
by cgarb
Probably the cost is the difference...lol
Break
Out
Another
Thousand
Re: 350/383 marine scropion cams
Posted: Tue Oct 13, 2020 5:43 pm
by bigmike
Is there a fuel pump lobe on all the cams?
Re: 350/383 marine scropion cams
Posted: Tue Oct 13, 2020 6:47 pm
by F-BIRD'88
It is a Crane hyd roller grind.. 222/230 @.050. 112 or 114 lsa. .509in -.528"ex (approx) Made for Mercury.. A near identical cam is listed in the Crane online catalog.
You can measure the in/ex cam lobes lift using a dial caliper. Major dia minus Minor diameter of the cam lobes.
Measure and post the in/ ex cam lobe lifts.