sbc 355
Moderator: Team
-
- Pro
- Posts: 331
- Joined: Fri Jun 20, 2014 8:41 am
- Location:
-
- Guru
- Posts: 2151
- Joined: Fri Apr 07, 2006 8:23 pm
- Location:
Re: sbc 355
You will have valve to piston issues with that combo, your heads are technically a 21.5 degree head rather than stock 23 degree.
Re: sbc 355
Those pistons would need valve notch machining, Mahle has a flat top piston to work with those heads, good stuff. I would also go with the 215 head on a 355