Interesting discussions and videos on CFD use for engines:
https://blogs.sw.siemens.com/simcenter/ ... -solution/
https://blogs.sw.siemens.com/simcenter/ ... celerator/
https://blogs.sw.siemens.com/simcenter/ ... -star-ccm/
https://blogs.sw.siemens.com/simcenter/ ... ement-amr/
Disclaimer: I do not sell this software and have never worked for Siemens
Engine development the modern way
Moderator: Team
-
- HotPass
- Posts: 539
- Joined: Sat Apr 10, 2010 10:23 am
- Location: Centurion, South Africa
- Contact:
Engine development the modern way
“Ignorance more frequently begets confidence than does knowledge.” -Charles Darwin, The Descent of Man
-
- Vendor
- Posts: 11003
- Joined: Mon Apr 11, 2005 2:30 am
- Location: CA
Re: Engine development the modern way
Nice collection.
Disclaimer: I did work for Siemens implementing their software for 20 years.
Disclaimer: I did work for Siemens implementing their software for 20 years.
Helping to Deliver the Promise of Flying Cars
-
- HotPass
- Posts: 3468
- Joined: Sat Feb 23, 2013 5:42 pm
- Location:
Re: Engine development the modern way
Thanks, Neels. Good stuff. I would love to play with this for some of the vintage stuff.
-Bob
-
- HotPass
- Posts: 539
- Joined: Sat Apr 10, 2010 10:23 am
- Location: Centurion, South Africa
- Contact:
Re: Engine development the modern way
Interestingly no-one is commenting on the second video which is on how Hendrick Motorsports is using the software.
“Ignorance more frequently begets confidence than does knowledge.” -Charles Darwin, The Descent of Man
Re: Engine development the modern way
Thanks for the sharing, very interesting, need time to process all that information.
-
- Vendor
- Posts: 3659
- Joined: Sat Feb 14, 2004 4:04 pm
- Location: Abbeville, LA
- Contact:
Re: Engine development the modern way
when you 1st posted that Link , i clicked on it ,
but all i saw Sieman's Menu choices Heading ... rest of page was blank ... same thing next Day ,
but now i can see all the page + video
all your other Links always worked ... it was only the Hendrick Motorsports NASCAR link page that rest of page was blank
maybe others saw the same thing i was seeing ... but it now works !
-
- HotPass
- Posts: 3468
- Joined: Sat Feb 23, 2013 5:42 pm
- Location:
Re: Engine development the modern way
Good video. Wish they did some white papers like Honda does.
I love looking at modern NASCAR combustion chambers and piston tops, knowing how much work, testing, measuring, simulating, etc. has been done to maximize combustion efficiency. Here is a contemporary Chevy R07 chamber (currently on eBay):
https://www.ebay.com/itm/R07-Cylinder-H ... SwPGBf59Ro
You could probably bring these images into CAD, scale it to a known (bore size, retainer diameter, etc) and get some measurements.
R07 pistons. Not sure if they compliment this particular chamber, but look close to what I have seen in others:
https://www.ebay.com/itm/NEW-NASCAR-CAP ... SwzaJYB8GW
Also interesting, I never heard of this company: http://capricornauto.co.uk/pistons
-Bob
-
- HotPass
- Posts: 9405
- Joined: Tue Nov 22, 2005 5:41 am
- Location:
Re: Engine development the modern way
https://www.materialsforengineering.co. ... -ltd/3801/hoffman900 wrote: ↑Sun Dec 27, 2020 8:47 pm ...
Also interesting, I never heard of this company: http://capricornauto.co.uk/pistons
https://www.semasan.com/breaking-news-archives?utm_campaign=DrivingForce_DF272&utm_content=SeeAllLeg