https://www.summitracing.com/parts/rnb-800-082
I know these are made to connect to nylon fuel lines, but could you use them with rubber hose? I’ve got a fuel tank sender that uses this style of connector, but I’m switching from nylon lines to steel (nicop), and planned to use a short section of rubber between the tank and the steel line.
If this won’t work, does anybody make a proper connector?
Fuel sender connection
Moderator: Team
Re: Fuel sender connection
Yes, those will work. There's also -6AN fittings available too, if you want to go that route.
Re: Fuel sender connection
I've used those with high pressure rubber hose to make adapters to tee into fuel lines for checking fuel pressure or cleaning injectors many times.
-
- Guru
- Posts: 1944
- Joined: Tue Sep 15, 2015 2:25 pm
- Location: