how to remove fuel hoops on bbc heads
Moderator: Team
-
- Guru
- Posts: 4607
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: how to remove fuel hoops on bbc heads
I am not familiar with your terminology, what is that relating to about or in the heads?
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!
-
- New Member
- Posts: 1
- Joined: Mon Jun 17, 2013 7:44 pm
- Location:
Re: how to remove fuel hoops on bbc heads
use a thin piece of thin metal with a .080 slit in it and tig it to the wire!
-
- New Member
- Posts: 34
- Joined: Wed Feb 27, 2013 3:04 am
- Location: Martinsville VA
Re: how to remove fuel hoops on bbc heads
I just had to remove a set a week ago.
After trying to fuse a section of filler rod to the hoops, I ended up just building up a ball of weld about .080 tall on each hoop. Pinched them with vise-grips, and wiggled them up and partially out of the groove. Use a thin gasket scraper to help finish prying them upwards as you go around.
The hoops actually came out a lot easier than I had anticipated.
After trying to fuse a section of filler rod to the hoops, I ended up just building up a ball of weld about .080 tall on each hoop. Pinched them with vise-grips, and wiggled them up and partially out of the groove. Use a thin gasket scraper to help finish prying them upwards as you go around.
The hoops actually came out a lot easier than I had anticipated.
Re: how to remove fuel hoops on bbc heads
Felix, qui potuit rerum cognscere causas.
Happy is he who can discover the cause of things.
Happy is he who can discover the cause of things.