Getting ready to pop a little bmw N20 short motor together, can't find main & rod bolt torque!
Anyone know?
Bmw N20 main & rod bolt torque?
Moderator: Team
-
- Guru
- Posts: 2682
- Joined: Fri Jan 09, 2009 8:51 pm
- Location: Australia
-
- Guru
- Posts: 1745
- Joined: Wed Aug 26, 2009 8:30 pm
- Location: Beautiful Southern Maryland
- Contact:
Re: Bmw N20 main & rod bolt torque?
ke,
My AERA software says:
Main Bearing Cap
(STEEL BOLTS 10.9) 15 FT/LBS, + 90° - USE NEW BOLTS
Connecting Rod
15 FT/LBS, + 70°, + 70° - USE NEW BOLTS, WASH & OIL
The AERA data is mostly from factory information so that should be correct.
My AERA software says:
Main Bearing Cap
(STEEL BOLTS 10.9) 15 FT/LBS, + 90° - USE NEW BOLTS
Connecting Rod
15 FT/LBS, + 70°, + 70° - USE NEW BOLTS, WASH & OIL
The AERA data is mostly from factory information so that should be correct.
Bill Koustenis
Advanced Automotive Machine
Waldorf Md
www.enginerepairshop.com
Advanced Automotive Machine
Waldorf Md
www.enginerepairshop.com
-
- Guru
- Posts: 2682
- Joined: Fri Jan 09, 2009 8:51 pm
- Location: Australia
Re: Bmw N20 main & rod bolt torque?
You, good sir, are a f*cking legend.
Thankyou very much, now I can piss off this miserable little shitbox.