Adger Smith

[MadBill]

(This may not be the right forum, but I believe it is the most read, so):
I've just discovered that this is Adger's most recent post, a full year old. I believe he is one of us of the Senior persuasion (and a Speed-Talker for 17 years) and I fear the worst. Does anyone have information?

Years ago when we did 9-10,000 RPM comp engines we started with a cc per cu in. . add till it fell off on the dyno. then take out tell it fell of when it was in the car. yes I've seen too much. The car gets lazy off the shift or 60's fall off.

[jed]

I have been wondering about Adger also. Last I heard he was a tech person at Engine Masters. Last I talked to him 2/3 years ago
he had closed his business to the public. He was doing some work for his long time customers. He had become interested in
small home made air craft and was build one of his own design.

[MadBill]

Let's hope then that he's taken to moving in three dimensions in lieu of two.

[maxracesoftware]

Adger came visit me at my Home and Shop about a year ago ,
his Son lives about 5-6 miles away from me .

i have his Phone/Cell#
i'll PM if you want it ?
and he emailed about 1 month ago about how i solved my SF-901 Dyno Cell Phone or RF problems for SF Console ?
Edit : Mar 4, 2021, 10:24 AM about 1 month ago


Adger also on FaceBook a lot .

https://www.facebook.com/adger.smith.9

[MadBill]

Thanks Max. Always sad to lose the contributions of a longtime Talker, but great to know he's still extant!

[Diodedog]

http://classracer.com/classforum/showth ... 223&page=2
He's getting ready to race again.

[nhrastocker]

Adger Smith is doing fine.
I communicate with him all the time and he very active in Facebook and still flying his airplane.
He had some minor health issues, nothing to worry, typical for all of us that are getting old.
...and yes, he is looking to return back to the track.

[ChevelleNut]

Yep. I talk to him pretty regular on Facebook. He was wanting to come look at my car I'm getting ready to sell. Adger is a excellent guy and machinist. A lot of knowledge in his head. I'll message him and tell him you were asking about him.

[Adger Smith]

Well it has been a circus.
I have had computer problems and didn't even know it.
I'm such an idiot with computers...
I couldn't get back on Speed Talk so I gave up and just became a watcher.
(Facebook was to easy to use)
Now thanks to a IT friend and our very own CamKing I am able to log in.
Bill, Did you really miss my dribble?
1. Yes, I have had some health issues
2. Covid coming along has helped treatment
3. I am planning on getting my car out soon. Tulsa Div 4 is target date (Obligations might negate)
4. Still have my shop operational.
5. Just open to some Good former customers.
6. I've not enjoyed retirement and I might re open, but can't do that without good help..( First..I've got some projects I'm interested in)
OK, That is it for now..

[Super_Stock]

Well Adger, I don't know you from a bar of soap, but it's good to hear your doing OK and thinking of doing a little racing !
I raise my glass and say, Best of luck and heath to you.

[racear2865]

Adger
Ill be glad to volunteer to help you.
reed grant

[MadBill]

...) Now thanks to a IT friend and our very own CamKing I am able to log in.
Bill, Did you really miss my dribble?

Always great to have contacts that know stuff and Yes.

[enigma57]

Great to hear from you, Adger. And that you are doing well. Always enjoy your posts and have learned a lot from you over the years.

I don't do facebook and all that stuff, but do stop by here every week or so. Look forward to reading your next posts.

Best regards,

Harry

[nhrastocker]

Adger
Ill be glad to volunteer to help you.
reed grant

Adger,
Do you really want Reed helping you?

[CamKing]

Now thanks to a IT friend and our very own CamKing I am able to log in.

Well then , I think this is a good time to remind everyone about our Hot-Pass membership.

groupsub/subs