It is a very simple calculator. There are only a few things it calculates and many things it does not, like valve / lobe lift.
Stan
Port CFM for Simulations
Moderator: Team
- Stan Weiss
- Vendor
- Posts: 4805
- Joined: Tue Feb 20, 2007 1:31 pm
- Location: Philadelphia, PA
- Contact:
Re: Port CFM for Simulations
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Re: Port CFM for Simulations
Is this Torque Master you're referring to?Stan Weiss wrote: ↑Thu Jul 29, 2021 11:50 am It is a very simple calculator. There are only a few things it calculates and many things it does not, like valve / lobe lift.
Stan
Kevin
- Stan Weiss
- Vendor
- Posts: 4805
- Joined: Tue Feb 20, 2007 1:31 pm
- Location: Philadelphia, PA
- Contact:
Re: Port CFM for Simulations
I referring to this calculator http://www.magneticlynx.com/carfor/calccamb.phpskinny z wrote: ↑Thu Jul 29, 2021 1:29 pmIs this Torque Master you're referring to?Stan Weiss wrote: ↑Thu Jul 29, 2021 11:50 am It is a very simple calculator. There are only a few things it calculates and many things it does not, like valve / lobe lift.
Stan
TM calculates valve lift and other things this calculator does not.
Stan
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization Software
http://www.magneticlynx.com/DV
Re: Port CFM for Simulations
Understood.Stan Weiss wrote: ↑Thu Jul 29, 2021 4:44 pmI referring to this calculator http://www.magneticlynx.com/carfor/calccamb.phpskinny z wrote: ↑Thu Jul 29, 2021 1:29 pmIs this Torque Master you're referring to?Stan Weiss wrote: ↑Thu Jul 29, 2021 11:50 am It is a very simple calculator. There are only a few things it calculates and many things it does not, like valve / lobe lift.
Stan
TM calculates valve lift and other things this calculator does not.
Stan
Thanks again as always Stan.
Kevin