Toyota 2jz gte con rod small end id
Moderator: Team
-
- Pro
- Posts: 224
- Joined: Mon Dec 11, 2006 12:40 am
- Location: pennsylvania
- Contact:
Toyota 2jz gte con rod small end id
Looking for the small end id with the bushing removed, wanting to hone and install a .927 pin
turbo5.0 240sx
-
- Guru
- Posts: 1762
- Joined: Wed Aug 26, 2009 8:30 pm
- Location: Beautiful Southern Maryland
- Contact:
Re: Toyota 2jz gte con rod small end id
The best I could do is come up with the od of the rod bushing which is .9546 ? Dont know if there is enough meat on the rod to put a bushing in for a .927 pin or not.
Bill Koustenis
Advanced Automotive Machine
Waldorf Md
www.enginerepairshop.com
Advanced Automotive Machine
Waldorf Md
www.enginerepairshop.com
-
- Pro
- Posts: 224
- Joined: Mon Dec 11, 2006 12:40 am
- Location: pennsylvania
- Contact: