Information overload warning.
This is a long video so settle down in the evening with it.
While it concerns the Ford 6.0 there is much info there that relates to machining every high HP engine and every day junk that might be helpful.
The author has other videos on the subject you may find interesting.
https://www.youtube.com/watch?v=LYWVp_n5CKw
Studs, bolts, MLS, surface flatness OH MY
Moderator: Team
- Dave Koehler
- Vendor
- Posts: 7205
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Studs, bolts, MLS, surface flatness OH MY
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
-
- Guru
- Posts: 1547
- Joined: Thu Sep 29, 2011 8:55 am
- Location:
-
- Pro
- Posts: 297
- Joined: Tue Aug 22, 2017 5:58 pm
- Location: Louisville,KY
Re: Studs, bolts, MLS, surface flatness OH MY
Thanks for the link to that video, it was very informative and the proper prep and understanding of fastener technology transfers over to all engine work as you stated. Worth the time.