Cracked Head: It’s Complicated

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
User avatar
Dave Koehler
Vendor
Posts: 7207
Joined: Mon Oct 04, 2004 11:19 pm
Location: Urbana, IL USA
Contact:
Contact Dave Koehler

Re: Cracked Head: It’s Complicated

Post by Dave Koehler »

I saw TIG and muggyweld in the same sentence. I thought they only had stick rod. Are you skinning the flux off?
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Top
Ishiftem
Member
Member
Posts: 193
Joined: Thu Feb 06, 2014 7:06 am
Location:

Re: Cracked Head: It’s Complicated

Post by Ishiftem »

Yes. Knock the flux off. The muggy guy said just start to barely melt the iron but nut to have a real puddle going. I figure the tig will give me the most control.
Top
Post Reply

Return to “Engine Tech”