Steve Morris Racing Engines Camshaft Info-Series

[n2omike]

He does specialize in blown/turbo applications, but most of this is relevant for n/a as well.

Part 1
https://www.youtube.com/watch?v=Zn-ZlGb-c2Q

Part 2
https://www.youtube.com/watch?v=ha_l3p4DulU

Part 3
https://www.youtube.com/watch?v=0cTWT4L73zQ

Part 4
https://www.youtube.com/watch?v=uzl09if-FzI

[maxracesoftware]

i just watched all those Videos last nite

[n2omike]

He's got a LOT of very good videos on a variety of topics. Highly worthwhile to subscribe and follow his page. Info is very relevant and up to date. Below is one on pushrods.

Pushrods
https://www.youtube.com/watch?v=4t6OmJFtF88

[maxracesoftware]

He's got a LOT of very good videos on a variety of topics. Highly worthwhile to subscribe and follow his page. Info is very relevant and up to date. Below is one on pushrods.

Pushrods
https://www.youtube.com/watch?v=4t6OmJFtF88

the only Video i think Steve left out important Info ( or did not know ) was on "Rocker Geometry" Video
most probably due to the Type of Heads/Engines he's used to dealing with

i'd like to see what Steve would say or come up with on Rocker Geometry
on a true Wedge Head SBC with single piece Jesel Shaft mounted Rockers
with 1.800:1 Intake Rocker Ratio
and
1.550:1 Exhaust Rocker Ratio
and see what Steve would discover ... on the Engine Stand and on the Dyno ???

Loved his Water Brake Absorber videos very much !!!

[WeingartnerRacing]

He does good videos.

[maxracesoftware]

He does good videos.

Eric ,
you have a whole bunch of great Videos on YouTube

as does Chad Speier

and also : StarRacingGA aka: George Bryce

[bob460]

I was surprised as well how short the LS cam was compared to the others.

I like all these video's that keep it real, make mistakes filming and not scripted BS.

Steve can also do a mean N/A cam .............he made 800tq on a 470ci LS.