He does specialize in blown/turbo applications, but most of this is relevant for n/a as well.
Part 1
https://www.youtube.com/watch?v=Zn-ZlGb-c2Q
Part 2
https://www.youtube.com/watch?v=ha_l3p4DulU
Part 3
https://www.youtube.com/watch?v=0cTWT4L73zQ
Part 4
https://www.youtube.com/watch?v=uzl09if-FzI
Steve Morris Racing Engines Camshaft Info-Series
Moderator: Team
-
- Vendor
- Posts: 3656
- Joined: Sat Feb 14, 2004 4:04 pm
- Location: Abbeville, LA
- Contact:
Re: Steve Morris Racing Engines Camshaft Info-Series
He's got a LOT of very good videos on a variety of topics. Highly worthwhile to subscribe and follow his page. Info is very relevant and up to date. Below is one on pushrods.
Pushrods
https://www.youtube.com/watch?v=4t6OmJFtF88
Pushrods
https://www.youtube.com/watch?v=4t6OmJFtF88
-
- Vendor
- Posts: 3656
- Joined: Sat Feb 14, 2004 4:04 pm
- Location: Abbeville, LA
- Contact:
Re: Steve Morris Racing Engines Camshaft Info-Series
the only Video i think Steve left out important Info ( or did not know ) was on "Rocker Geometry" Videon2omike wrote: ↑Tue Nov 30, 2021 1:47 pm He's got a LOT of very good videos on a variety of topics. Highly worthwhile to subscribe and follow his page. Info is very relevant and up to date. Below is one on pushrods.
Pushrods
https://www.youtube.com/watch?v=4t6OmJFtF88
most probably due to the Type of Heads/Engines he's used to dealing with
i'd like to see what Steve would say or come up with on Rocker Geometry
on a true Wedge Head SBC with single piece Jesel Shaft mounted Rockers
with 1.800:1 Intake Rocker Ratio
and
1.550:1 Exhaust Rocker Ratio
and see what Steve would discover ... on the Engine Stand and on the Dyno ???
Loved his Water Brake Absorber videos very much !!!
-
- Expert
- Posts: 736
- Joined: Sun Dec 14, 2008 8:37 pm
- Location: Broken Arrow, Oklahoma
- Contact:
Re: Steve Morris Racing Engines Camshaft Info-Series
He does good videos.
Eric Weingartner
Weingartner Racing LLC
918-520-3480
www.wengines.com
Weingartner Racing LLC
918-520-3480
www.wengines.com
-
- Vendor
- Posts: 3656
- Joined: Sat Feb 14, 2004 4:04 pm
- Location: Abbeville, LA
- Contact:
Re: Steve Morris Racing Engines Camshaft Info-Series
Eric ,
you have a whole bunch of great Videos on YouTube
as does Chad Speier
and also : StarRacingGA aka: George Bryce
Re: Steve Morris Racing Engines Camshaft Info-Series
I was surprised as well how short the LS cam was compared to the others.
I like all these video's that keep it real, make mistakes filming and not scripted BS.
Steve can also do a mean N/A cam .............he made 800tq on a 470ci LS.
I like all these video's that keep it real, make mistakes filming and not scripted BS.
Steve can also do a mean N/A cam .............he made 800tq on a 470ci LS.