Lets hear about it...
https://www.corvetteforum.com/forums/at ... 6f631.jpeg
Edelbrock VRS-4150 Carbs
Moderator: Team
-
- Expert
- Posts: 994
- Joined: Sun Mar 21, 2010 9:48 pm
- Location: Somewhere, Alaska
- Contact:
Re: Edelbrock VRS-4150 Carbs
One piece body is a huge mistake, break a mounting ear by accident, carb is done.....
Average racer tunes by jet changes.....four circuit carb will require substantially more ability to maximize tune, making it less desirable for those who aren't as skilled at tuning...
Proven no need for anything other than a two circuit carb on pretty much any 4150 style, there is no performance to be gained when carb is properly sized/tuned for it's application.....
Not sure I like it or not....but it will have a market and serve it's purpose. Big thing will be how close is out of the box tune, and how responsive to changes......
Average racer tunes by jet changes.....four circuit carb will require substantially more ability to maximize tune, making it less desirable for those who aren't as skilled at tuning...
Proven no need for anything other than a two circuit carb on pretty much any 4150 style, there is no performance to be gained when carb is properly sized/tuned for it's application.....
Not sure I like it or not....but it will have a market and serve it's purpose. Big thing will be how close is out of the box tune, and how responsive to changes......
Mark Goulette
Owner/Driver of the Livin' The Dream rear engine dragster
Speed kills but it's better than going slow!
http://www.livinthedreamracing.com
Authorized Amsoil Retailer
Owner/Driver of the Livin' The Dream rear engine dragster
Speed kills but it's better than going slow!
http://www.livinthedreamracing.com
Authorized Amsoil Retailer
-
- Member
- Posts: 138
- Joined: Thu Dec 24, 2020 4:25 pm
- Location: Phoenix, Arizona
Re: Edelbrock VRS-4150 Carbs
Interesting.
I assume it’s brand spankin’ new? It’s not even on the website yet
I assume it’s brand spankin’ new? It’s not even on the website yet
Re: Edelbrock VRS-4150 Carbs
Hecho in China
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
-
- HotPass
- Posts: 104
- Joined: Mon Dec 11, 2017 2:16 pm
- Location: Boise
Re: Edelbrock VRS-4150 Carbs
I think its great that they put so much thought into them . Price point should be interesting .2
Re: Edelbrock VRS-4150 Carbs
I would love to test one om my car but if the price is like $700 for one then I'm out. My FST 850hp worked very well this year for an out of the box carburetor, it was only $422 with a lot of nice features.