What is everyone’s brand/manufacturer preference for Melonized steel distributor gears ? Quality and durability are major concerns.
I have access to a Crane and Morel gear.
Thanks
Melonized Distributor Gears Brand/Manufacturer
Moderator: Team
Re: Melonized Distributor Gears Brand/Manufacturer
I use the gear that came on my $80 Chinese HEI dist. Been in use about 4 yrs, driven most weekends. I check ign timing [ will retard if gears wear ] every few months & last check it had advanced 1 degree!!
-
- Guru
- Posts: 6386
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: Melonized Distributor Gears Brand/Manufacturer
First of all ... "Melonized" is a trade name for a specific process. Other companies will simply call it something else.
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.
-
- Pro
- Posts: 365
- Joined: Wed Nov 07, 2012 6:28 pm
- Location: Tallahassee Florida USofA
Re: Melonized Distributor Gears Brand/Manufacturer
"Melonized" is just a trade name for a specific salt-bath nitriding process.
We sell "Melonized" steel gears for SBC, and BBC engines, with either the .492" or ,500" bore size.
We have them made for us, in the U.S., by the same gear manufacturer that makes the 8620 steel gears we press onto our tool steel cores.
We sell the gears for $74.00 each.
We sell "Melonized" steel gears for SBC, and BBC engines, with either the .492" or ,500" bore size.
We have them made for us, in the U.S., by the same gear manufacturer that makes the 8620 steel gears we press onto our tool steel cores.
We sell the gears for $74.00 each.
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449