Parts for Keith Black gear drive
Moderator: Team
-
- Member
- Posts: 164
- Joined: Wed Jan 30, 2013 5:14 pm
- Location: Stuttgart, Arkansas
Parts for Keith Black gear drive
I have the cover for a Keith Black 426 Hemi gear drive but I need the guts. Everybody says the crank gears of different mfg's will interchange. I would think the cam gear might. The idler looks like a Donovan idler. Is there someone knowledgeable on gear drives that I could call? Thanks Rick
-
- Guru
- Posts: 4607
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: Parts for Keith Black gear drive
Since new gut's will cost a good bit anyway I would just get a new Milodon set up since if I recall right it fits in a stock timing cover with 5 minutes worth of rework.
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!
-
- Guru
- Posts: 4607
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: Parts for Keith Black gear drive
Not from what I see in my catalog!
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!
Re: Parts for Keith Black gear drive
If it’s a Hemi or a BBM it takes a cover. Anything with a cheap stamped tin cover has to have a cast aluminum cover. How do you fix the idler to the cover if it’s tin? And the cover isn’t thick enough to allow for the idler to be fixed to a plate. That would be a cover like the SBM, Pontiac, Ford etc. Anything with a timing cover that isn’t stamped tin can used a fixed idler gear drive that fits under the OE cover. Otherwise it’s has to have a cover.
Re: Parts for Keith Black gear drive
Big block chrysler gear drive from Milodon.
You do not have the required permissions to view the files attached to this post.
-
- Guru
- Posts: 4607
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: Parts for Keith Black gear drive
The idler is on a steel plate that they say bolts to the block.
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!