Gen 3 6.4 hemi blueprint
Moderator: Team
Gen 3 6.4 hemi blueprint
Does anyone have a blueprint of a 6.4 block. Broke a bolt off in the block holding on the piston oilers. POS didn't even get to 10ftld and the head snapped off. I've got it in the mill but was hoping to find dimensions fron oilhole to bolt hole.
-
- Guru
- Posts: 1760
- Joined: Wed Aug 26, 2009 8:30 pm
- Location: Beautiful Southern Maryland
- Contact:
Re: Gen 3 6.4 hemi blueprint
Can you not just measure one of the other ones ? If the head broke off the rest of it will probably come right out with a LH drill bit. I have a block at the shop I can measure Monday.
Bill Koustenis
Advanced Automotive Machine
Waldorf Md
www.enginerepairshop.com
Advanced Automotive Machine
Waldorf Md
www.enginerepairshop.com
Re: Gen 3 6.4 hemi blueprint
I can get my coax indicator and measure one of the other oilers and get the measurements close. Was hoping someone may have a blue print just to verify things