(Specific to Holley metering blocksj
Sometimes I see them in the dog leg, sometimes in the booster feed, sometimes both, sometimes neither. I understand their intended purpose, what I don’t understand is the varied placements and diameters. Can y’all give me some insight into this?
Kill bleeds
Moderator: Team
-
- Member
- Posts: 138
- Joined: Thu Dec 24, 2020 4:25 pm
- Location: Phoenix, Arizona
-
- Guru
- Posts: 6386
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: Kill bleeds
If that particular booster design has a tendency to siphon then the metering block will have a "kill" bleed to prevent that.ArizonaGuy wrote: ↑Thu Sep 15, 2022 9:31 am (Specific to Holley metering blocksj
Sometimes I see them in the dog leg, sometimes in the booster feed, sometimes both, sometimes neither. I understand their intended purpose, what I don’t understand is the varied placements and diameters. Can y’all give me some insight into this?
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.