SBC Intake Manifolds: Creating Another List.

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Dave B
Pro
Pro
Posts: 333
Joined: Fri Jan 20, 2023 10:07 am
Location: Midwest

Re: SBC Intake Manifolds: Creating Another List.

Post by Dave B »

In-Tech wrote: Mon Jan 23, 2023 1:04 am
ChopperScott wrote: Sat Jan 14, 2023 7:01 pm This is his current intake manifold...

Mike Thompson Intake.jpeg
Here's my little 430" LS with -12 rails, Intake made by John at CID. CFD designed by Jon Schmidt

20220722_180419.jpg
20220722_191048.jpg
Need to see important side,the inside.
In-Tech
Vendor
Posts: 2812
Joined: Wed Apr 21, 2010 4:35 am
Location: Fresno, CA

Re: SBC Intake Manifolds: Creating Another List.

Post by In-Tech »

Yes... I am pretty sure I have some pics, now to find them. That one is standard LS3, Saving up for a pair of CNC CID LS7 heads and intake, will post pics for sure.
Heat is energy, energy is horsepower...but you gotta control the heat.
-Carl
ChopperScott
HotPass
HotPass
Posts: 594
Joined: Tue Nov 30, 2021 8:47 am
Location: West Milford, NJ
Contact:

Re: SBC Intake Manifolds: Creating Another List.

Post by ChopperScott »

Dave B wrote: Mon Jan 23, 2023 8:06 am
In-Tech wrote: Mon Jan 23, 2023 1:04 am
ChopperScott wrote: Sat Jan 14, 2023 7:01 pm This is his current intake manifold...

Mike Thompson Intake.jpeg
Here's my little 430" LS with -12 rails, Intake made by John at CID. CFD designed by Jon Schmidt

20220722_180419.jpg
20220722_191048.jpg
Need to see important side,the inside.
MT Beer Can.jpeg
You do not have the required permissions to view the files attached to this post.
'73 Camaro Z/28 NETO/N
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278
In-Tech
Vendor
Posts: 2812
Joined: Wed Apr 21, 2010 4:35 am
Location: Fresno, CA

Re: SBC Intake Manifolds: Creating Another List.

Post by In-Tech »

Heat is energy, energy is horsepower...but you gotta control the heat.
-Carl
Dave B
Pro
Pro
Posts: 333
Joined: Fri Jan 20, 2023 10:07 am
Location: Midwest

Re: SBC Intake Manifolds: Creating Another List.

Post by Dave B »

In-Tech wrote: Mon Jan 23, 2023 11:41 am A little more info and pics here. https://www.cidheads.com/products/be-4- ... k-4500-efi
Yes,I have had several here.Was just wanting to see if yours was anything special.lol
1980RS
Guru
Guru
Posts: 1636
Joined: Thu Oct 13, 2016 10:03 am
Location:

Re: SBC Intake Manifolds: Creating Another List.

Post by 1980RS »

ChopperScott wrote: Mon Jan 23, 2023 11:11 am
Dave B wrote: Mon Jan 23, 2023 8:06 am
In-Tech wrote: Mon Jan 23, 2023 1:04 am
Here's my little 430" LS with -12 rails, Intake made by John at CID. CFD designed by Jon Schmidt

20220722_180419.jpg
20220722_191048.jpg
Need to see important side,the inside.
MT Beer Can.jpeg
Hey, you forgot the ice. :lol:
Wetflow
New Member
New Member
Posts: 49
Joined: Wed Jul 20, 2022 11:22 pm
Location: Ormond Beach, FL

Re: SBC Intake Manifolds: Creating Another List.

Post by Wetflow »

mt-engines wrote: Fri Jan 20, 2023 5:19 pm The only thing that intake should be on, is a rules only cast intake 500 inch engine that spins 9000.
Perhaps everyone is looking at this as a N/A manifold. I think this manifold may be designed with boost/dry flow only in mind. IMHO it looks ideal in that case.
User avatar
Tom68
HotPass
HotPass
Posts: 2541
Joined: Mon Feb 07, 2022 3:43 am
Location: VIC OZ

Re: SBC Intake Manifolds: Creating Another List.

Post by Tom68 »

Wetflow wrote: Tue Jan 24, 2023 1:47 pm
mt-engines wrote: Fri Jan 20, 2023 5:19 pm The only thing that intake should be on, is a rules only cast intake 500 inch engine that spins 9000.
Perhaps everyone is looking at this as a N/A manifold. I think this manifold may be designed with boost/dry flow only in mind. IMHO it looks ideal in that case.
Comments are based on runner size and length.
Ignorance leads to confidence more often than knowledge does.
Nah, I'm not leaving myself out of the ignorant brigade....at times.
skinny z
HotPass
HotPass
Posts: 2642
Joined: Tue Mar 11, 2008 8:42 am
Location: AB. CA.

Re: SBC Intake Manifolds: Creating Another List.

Post by skinny z »

This should be interesting.
A preview to Weingartner testing a half dozen or more intakes on a 406 dyno mule.

https://www.youtube.com/watch?v=15bCe0cSSIE
Kevin
bob460
Expert
Expert
Posts: 560
Joined: Thu Sep 26, 2019 6:19 am
Location: Australia

Re: SBC Intake Manifolds: Creating Another List.

Post by bob460 »

EDC
Expert
Expert
Posts: 506
Joined: Wed Dec 29, 2004 7:33 pm
Location: in your mind's eye
Contact:

Re: SBC Intake Manifolds: Creating Another List.

Post by EDC »

Scott...

Time to talk to Chris about his intake. :wink:

Image
"Quality" is like buying oats. You can pay a fair price for it and get some good quality oats,
or you can get it a hell of a lot cheaper, when it's already been through the horse.

Nil Satis Nisi Optimum

Ed Curtis - www.FlowTechInduction.com
In-Tech
Vendor
Posts: 2812
Joined: Wed Apr 21, 2010 4:35 am
Location: Fresno, CA

Re: SBC Intake Manifolds: Creating Another List.

Post by In-Tech »

EDC wrote: Fri Feb 03, 2023 7:53 am Scott...

Time to talk to Chris about his intake. :wink:

Image
That thing could never work, big vacuum leak on the valve covers and those cam journals are way too large to make any oil pressure :lol: :lol: :lol:
Heat is energy, energy is horsepower...but you gotta control the heat.
-Carl
ChopperScott
HotPass
HotPass
Posts: 594
Joined: Tue Nov 30, 2021 8:47 am
Location: West Milford, NJ
Contact:

Re: SBC Intake Manifolds: Creating Another List.

Post by ChopperScott »

EDC wrote: Fri Feb 03, 2023 7:53 am Scott...

Time to talk to Chris about his intake. :wink:

Image
Seriously!

If I unloaded a few of mine, I could make that call. Anyone interested in a manifold? I've got a nice selection. :D
'73 Camaro Z/28 NETO/N
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278
Dave B
Pro
Pro
Posts: 333
Joined: Fri Jan 20, 2023 10:07 am
Location: Midwest

Re: SBC Intake Manifolds: Creating Another List.

Post by Dave B »

I think the reworked trick flow has as good of chance of running with that URE intake on Scotts engine.I would like to run our 2022 Vette on its e85 tune against your car Scott.We only got 3 passes on it late last yr.We did manage 9.93@134.97.It was in 2200 corrected Da in Midwest fall air.3630 lbs .
Post Reply