SBC Intake Manifolds: Creating Another List.

General engine tech -- Drag Racing to Circle Track

Moderator: Team

skinny z
HotPass
HotPass
Posts: 2642
Joined: Tue Mar 11, 2008 8:42 am
Location: AB. CA.

Re: SBC Intake Manifolds: Creating Another List.

Post by skinny z »

Duly noted.
The list, although started, has kind of stalled as I'm knee deep in home renovations and truck repairs.
Kevin
ChopperScott
HotPass
HotPass
Posts: 594
Joined: Tue Nov 30, 2021 8:47 am
Location: West Milford, NJ
Contact:

Re: SBC Intake Manifolds: Creating Another List.

Post by ChopperScott »

Ignore my comments on the last post. I jumped to conclusion. That ProFiler Wilson manifold design, as-cast, requires plenum and port work. :oops:
'73 Camaro Z/28 NETO/N
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278
ChopperScott
HotPass
HotPass
Posts: 594
Joined: Tue Nov 30, 2021 8:47 am
Location: West Milford, NJ
Contact:

Re: SBC Intake Manifolds: Creating Another List.

Post by ChopperScott »

IMG_7455.JPG
IMG_7454.JPG
You do not have the required permissions to view the files attached to this post.
'73 Camaro Z/28 NETO/N
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278
ChopperScott
HotPass
HotPass
Posts: 594
Joined: Tue Nov 30, 2021 8:47 am
Location: West Milford, NJ
Contact:

Re: SBC Intake Manifolds: Creating Another List.

Post by ChopperScott »

I'm not much of a speaker or film editor... :roll:

Trick Flow R-Series Intake Manifold

Profiler Wilson Intake Manifold
'73 Camaro Z/28 NETO/N
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278
1980RS
Guru
Guru
Posts: 1636
Joined: Thu Oct 13, 2016 10:03 am
Location:

Re: SBC Intake Manifolds: Creating Another List.

Post by 1980RS »

ChopperScott wrote: Wed Dec 21, 2022 9:51 am I'm not much of a speaker or film editor... :roll:

Trick Flow R-Series Intake Manifold

Profiler Wilson Intake Manifold
Oh I don't know about that, I watched your videos. They seem ok to me.
ChopperScott
HotPass
HotPass
Posts: 594
Joined: Tue Nov 30, 2021 8:47 am
Location: West Milford, NJ
Contact:

Re: SBC Intake Manifolds: Creating Another List.

Post by ChopperScott »

1980RS wrote: Wed Dec 21, 2022 4:27 pm
ChopperScott wrote: Wed Dec 21, 2022 9:51 am I'm not much of a speaker or film editor... :roll:

Trick Flow R-Series Intake Manifold

Profiler Wilson Intake Manifold
Oh I don't know about that, I watched your videos. They seem ok to me.
50841AA9-54C7-4A30-A5D6-F5BA2300DCE2.jpeg
You do not have the required permissions to view the files attached to this post.
'73 Camaro Z/28 NETO/N
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278
User avatar
Tom68
HotPass
HotPass
Posts: 2541
Joined: Mon Feb 07, 2022 3:43 am
Location: VIC OZ

Re: SBC Intake Manifolds: Creating Another List.

Post by Tom68 »

A giant inline 4 barrel on this would be interesting.

322334705_703306947859494_497483818719052671_n.jpg

322577054_835076717772864_3912771957549101050_n.jpg
You do not have the required permissions to view the files attached to this post.
Ignorance leads to confidence more often than knowledge does.
Nah, I'm not leaving myself out of the ignorant brigade....at times.
SpeierRacingHeads
Vendor
Posts: 937
Joined: Sun May 13, 2012 1:28 pm
Location: KS
Contact:

Re: SBC Intake Manifolds: Creating Another List.

Post by SpeierRacingHeads »

2925
You do not have the required permissions to view the files attached to this post.
Speier Racing Heads
Chad Speier
785-623-0963
ChopperScott
HotPass
HotPass
Posts: 594
Joined: Tue Nov 30, 2021 8:47 am
Location: West Milford, NJ
Contact:

Re: SBC Intake Manifolds: Creating Another List.

Post by ChopperScott »

SpeierRacingHeads wrote: Wed Jan 04, 2023 11:16 am 2925
As always, impressive work!
'73 Camaro Z/28 NETO/N
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278
User avatar
Tom68
HotPass
HotPass
Posts: 2541
Joined: Mon Feb 07, 2022 3:43 am
Location: VIC OZ

Re: SBC Intake Manifolds: Creating Another List.

Post by Tom68 »

For sale on Facebook, one for the Moonshiners.
Air entrance is concealed to thwart authorities.

324142668_1231467684448267_3959588221588481733_n.jpg

323919114_6069742803037822_3404347897028189223_n.jpg
You do not have the required permissions to view the files attached to this post.
Ignorance leads to confidence more often than knowledge does.
Nah, I'm not leaving myself out of the ignorant brigade....at times.
ChopperScott
HotPass
HotPass
Posts: 594
Joined: Tue Nov 30, 2021 8:47 am
Location: West Milford, NJ
Contact:

Re: SBC Intake Manifolds: Creating Another List.

Post by ChopperScott »

For the Holley fans, here is a new out-of-the-box 300-25 Strip Dominator with a 1205 gasket...
IMG_7556.JPG
IMG_7552.JPG
IMG_7553.JPG
IMG_7554.JPG
IMG_7555.JPG
You do not have the required permissions to view the files attached to this post.
'73 Camaro Z/28 NETO/N
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278
rfoll
Guru
Guru
Posts: 3023
Joined: Mon Jan 11, 2010 12:44 pm
Location: St. Helens, OR

Re: SBC Intake Manifolds: Creating Another List.

Post by rfoll »

I was surprised how much material I had to remove from the roof to fit my Track 1 heads. A Vic Jr. is tiny compared to the 300-25. I was also surprised of the quality of the casting compared to all of the Edelbrock manifolds I have.
So much to do, so little time...
Monza355
Expert
Expert
Posts: 504
Joined: Sat Dec 07, 2013 6:06 pm
Location:

Re: SBC Intake Manifolds: Creating Another List.

Post by Monza355 »

ChopperScott wrote: Tue Jan 10, 2023 12:07 pm For the Holley fans, here is a new out-of-the-box 300-25 Strip Dominator with a 1205 gasket...
How does the 1206 gasket fit the 300-25 strip dominator ?
rfoll
Guru
Guru
Posts: 3023
Joined: Mon Jan 11, 2010 12:44 pm
Location: St. Helens, OR

Re: SBC Intake Manifolds: Creating Another List.

Post by rfoll »

It's what I use because the heads require it.
So much to do, so little time...
ChopperScott
HotPass
HotPass
Posts: 594
Joined: Tue Nov 30, 2021 8:47 am
Location: West Milford, NJ
Contact:

Re: SBC Intake Manifolds: Creating Another List.

Post by ChopperScott »

rfoll wrote: Tue Jan 10, 2023 12:16 pm I was surprised how much material I had to remove from the roof to fit my Track 1 heads. A Vic Jr. is tiny compared to the 300-25. I was also surprised of the quality of the casting compared to all of the Edelbrock manifolds I have.
What surprised you concerning the quality of casting?
Monza355 wrote: Tue Jan 10, 2023 5:20 pm How does the 1206 gasket fit the 300-25 strip dominator ?
I'll head out to the garage and take a few pics.
'73 Camaro Z/28 NETO/N
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278
Post Reply