cam duration

General engine tech -- Drag Racing to Circle Track

Moderator: Team

rumpity_z28
New Member
New Member
Posts: 21
Joined: Mon Oct 04, 2021 3:59 pm
Location:

Re: cam duration

Post by rumpity_z28 »

CamKing wrote: Mon Jan 09, 2023 10:18 am I would not go over an intake duration of 228@.050"
Hey Mike do you make a cam that you would recommend?
User avatar
CamKing
Guru
Guru
Posts: 10709
Joined: Wed Aug 08, 2007 4:05 pm
Location: Denver, NC
Contact:

Re: cam duration

Post by CamKing »

rumpity_z28 wrote: Thu Feb 02, 2023 12:37 pm
CamKing wrote: Mon Jan 09, 2023 10:18 am I would not go over an intake duration of 228@.050"
Hey Mike do you make a cam that you would recommend?
We can make you something, but I need more info.
When you have time, fill this out, and submit it.
http://jonescams.com/street-performance/
Mike Jones
Jones Cam Designs

Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
rumpity_z28
New Member
New Member
Posts: 21
Joined: Mon Oct 04, 2021 3:59 pm
Location:

Re: cam duration

Post by rumpity_z28 »

CamKing wrote: Thu Feb 02, 2023 1:31 pm
rumpity_z28 wrote: Thu Feb 02, 2023 12:37 pm
CamKing wrote: Mon Jan 09, 2023 10:18 am I would not go over an intake duration of 228@.050"
Hey Mike do you make a cam that you would recommend?
We can make you something, but I need more info.
When you have time, fill this out, and submit it.
http://jonescams.com/street-performance/
Thank you Mike I filled out the cam recommendation form.
Post Reply