I have a customer getting ready to put together a 350 Chevy that his son started on 20 years ago Pistons are Zollner Z8101A and he wanted me to measure them to make sure the clearance was going to be ok. They appear to be a Hypereutectic material but they have a thin steel strut around each side. I am getting more clearance than I think they should have at the bottom of the skirt, almost .004" They are 30 over pistons and are measuring 4.026 or so. These are new parts.
Anyway, I have a 1994 Zollner catalog but they are not in there. Just curious if anyone might have a different catalog that might show them. They are a 2 valve relief flat top.
I am sure he is going to run them anyway but I told him I would try to find out.
Thanks !
Anyone have an old Zollner Piston catalog ?
Moderator: Team
-
- Guru
- Posts: 1762
- Joined: Wed Aug 26, 2009 8:30 pm
- Location: Beautiful Southern Maryland
- Contact:
Anyone have an old Zollner Piston catalog ?
Bill Koustenis
Advanced Automotive Machine
Waldorf Md
www.enginerepairshop.com
Advanced Automotive Machine
Waldorf Md
www.enginerepairshop.com