Anyone have an old Zollner Piston catalog ?

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
BillK
Guru
Guru
Posts: 1745
Joined: Wed Aug 26, 2009 8:30 pm
Location: Beautiful Southern Maryland
Contact:

Anyone have an old Zollner Piston catalog ?

Post by BillK »

I have a customer getting ready to put together a 350 Chevy that his son started on 20 years ago :) Pistons are Zollner Z8101A and he wanted me to measure them to make sure the clearance was going to be ok. They appear to be a Hypereutectic material but they have a thin steel strut around each side. I am getting more clearance than I think they should have at the bottom of the skirt, almost .004" They are 30 over pistons and are measuring 4.026 or so. These are new parts.

Anyway, I have a 1994 Zollner catalog but they are not in there. Just curious if anyone might have a different catalog that might show them. They are a 2 valve relief flat top.

I am sure he is going to run them anyway but I told him I would try to find out.

Thanks !
Bill Koustenis
Advanced Automotive Machine
Waldorf Md

www.enginerepairshop.com
Post Reply