VW 8 Valve Counter Flow Cylinder Head
Moderator: Team
-
- Member
- Posts: 63
- Joined: Sun Feb 11, 2007 12:53 pm
- Location:
VW 8 Valve Counter Flow Cylinder Head
Hello, Could any one on the forum please direct me to a shop or individual who could race prepare, (flow bech work etc), for the VW 8 valve counter flow water cooled cylinder head? This head was fitted to the early rabbit and Siroccos 1.8 CID. THANKS FOR ANY INSIGHT AND INFORMATION!!!!!! Jerry
Re: VW 8 Valve Counter Flow Cylinder Head
Race prepare? I would start by listening to a shop that can keep the camshaft in one piece
-juhana
-juhana
A balanced person dares to stagger, and modify ports bigger
Re: VW 8 Valve Counter Flow Cylinder Head
where are you located? what are the rules? SPA turbo used to have a big port counter flow head. I just looked, it was/is a crossflow head.
Techtonics in Oregon knows those heads very well, and they've figured out what parts are junk. Like most of the camshafts.
good luck with your project!!
Techtonics in Oregon knows those heads very well, and they've figured out what parts are junk. Like most of the camshafts.
good luck with your project!!