Speed-Talk is running on www.Speed-Talk.com

IMPORTANT: Update your bookmarks to https://www.speed-talk.com/forum/
(Right-click the URL and select "Bookmark this link")

Combination or Conversion Uni - Any good or flawed?

Shocks, Springs, Brakes, Frame, Body Work, etc

Moderator: Team

Post Reply
Chargermal
Pro
Pro
Posts: 252
Joined: Tue Feb 05, 2008 8:17 pm
Location:
Contact:

Combination or Conversion Uni - Any good or flawed?

Post by Chargermal »

I’d like to know if anyone any issues running this type of U joint.

I’m referring to what I call a conversion Uni - that is it is designed to mate one size weld yoke to a different size pinion or slip yoke.

EG 1350/7290, 1330/1350, 1330/7260 etc....

Anyone with any experiences...good or bad?

Thx👍
Kenova
Expert
Expert
Posts: 502
Joined: Wed Sep 01, 2010 9:05 pm
Location: Ontario, Can.

Re: Combination or Conversion Uni - Any good or flawed?

Post by Kenova »

I am using one in my '71 Nova. 1330 to 1310 (I think I got that right).
I have only put about 500 miles on it but have done so without any problems.
That also includes the occasional bit of Tom Foolery. :mrgreen:

Ken
Over the hill but still learning!
Retaining it is the hard part.
Post Reply