Ive got a Dart SBC with 1 piece rear main seal and a chevy replica bellhousing to suit 11 flywheel.
Does anyone make a dust cover to suit this application, I can only find older 2 piece rear main seal.
I guessing Chevy never sold a manual car with 1 piece rear SBC (Gen 2, I think its 1987-92). So its only aftermarket.
If I had the dimensions of the rear main seal casting I could possibly chop up a Gen 1 dust cover. Does anyone have the DIA?
Is the BBC Gen5/6 rear main casting the same dia as a SBC Gen 2?
Flywheel dust cover
Moderator: Team
Re: Flywheel dust cover
Chevy did sell manual V8s '87-92, in the form of T5 transmission 305-engined Camaro/Firebirds. Also Corvettes, with the 4+3 T10 or the ZF 6-speed.
This doesn't count trucks of course, which used the SBC until '98 or '00 or something. Also doesn't count LT1s, which only ever had T56 for manuals, but were otherwise 1-piece SBCs as far as the crank and bellhousing were concerned.
This doesn't count trucks of course, which used the SBC until '98 or '00 or something. Also doesn't count LT1s, which only ever had T56 for manuals, but were otherwise 1-piece SBCs as far as the crank and bellhousing were concerned.