JKM Flow Bench
Moderator: Team
JKM Flow Bench
Hi guys, I have a JKM600 flow bench that I just can't figure out what to do, I got a vacuum hose diagram off the internet and it looked like mine were installed wrong so I changed them to match the diagram, no luck, I think I just made it worst, can anyone that can help?
Re: JKM Flow Bench
@fastvette PM him and see if he can help you. I had a JKM bench. Should have never sold it.liqu wrote: ↑Sat Sep 10, 2022 6:21 pm Hi guys, I have a JKM600 flow bench that I just can't figure out what to do, I got a vacuum hose diagram off the internet and it looked like mine were installed wrong so I changed them to match the diagram, no luck, I think I just made it worst, can anyone that can help?
What issue(s) are you having?
Re: JKM Flow Bench
I bought it and have never been able to make it work, I think I need a walk through of how to use it and what to look for.
Re: JKM Flow Bench
I have a JKM 600. If you aren't in big hurry, I can pull mine apart and draw a schematic.
You may have a bad piece of tubing. The surgical tube Jerry used is prone to crack and split. Replaced some of it with clear plastic hose.
You may have a bad piece of tubing. The surgical tube Jerry used is prone to crack and split. Replaced some of it with clear plastic hose.
Monty Frerichs
B&M Machine
B&M Machine
Re: JKM Flow Bench
Hi, that would help ALOT, I can figure it out if I know that the setup I have is correct.
Thanks Cliff
Thanks Cliff
Re: JKM Flow Bench
I sold mine years ago to Jmark. He might still have it.
http://www.youtube.com/watch?v=itIITBanJDs
http://www.harshmanauto.com
http://www.harshmanauto.com
Re: JKM Flow Bench
When testing exhaust flow the switches are up and down for intake test
You do not have the required permissions to view the files attached to this post.
Monty Frerichs
B&M Machine
B&M Machine