Dart Iron Eagle block - 4.176 bore - 55mm cam tunnel - SB2.2 lifter pattern
Crower crank - 4" stroke - 400 mains - 2" rods - 1760 bobweight
JGR SB2.2 heads,oval port,45.4cc chambers
Titanium intake valves - 2.180 - 5.685 long- 7mm -50*
Titanium exhaust valves - 1.600 - 5.615 long- 5/16 -55*
T&D 1.95 - 1.90 rockers
Wegner ported Edelbrock 2866 intake
Callies Ultra H-beam 6" rods - 628 grams
ATI 7" balancer
MSD 85501 distributor with cap-adapt
MSD crank trigger
Racetec pistons with 1.2-1.5-3mm rings,-10cc flattops
Champ wet sump 8 quart oil pan plus filter & lines
Comp Cam gun drilled 55mm billet cam
DLC coated Morel .937 keyway lifters
PSI CT1245 springs - In - 2.075 - Ex - 2.055
Manley 530 titanium retainers
Bosch spark plugs
Scott spark plug wires
7/16 X .125 X 8.950 - 9.250 pushrods
14.18 compression
Fresh off dyno
867hp @ 7500
673# torque @ 6300
$17,500 cash picked up
Phone: 1-865-567-6943
Email: terry.marciaburnett@gmail.com
[attachment=1]IMG_20211023_165548.jpg[/attachment][attachment=0]IMG_20211020_191732.jpg[/attachment]
438ci SB2.2 Engine - 867hp
Moderator: Team
Re: 438ci SB2.2 Engine - 867hp
Engine was dynoed with Stelth 1.450 carburetor on Renegade 112 gas & 28* timing.I have lots of pictures,dyno sheet and a video of dyno pull that I can email interested parties.
Re: 438ci SB2.2 Engine - 867hp
Sorry I deleted the pictures while trying to clean up ad.[attachment=0]IMG_20211023_140455.jpg[/attachment]