New domain:

The forum is currently running on the new domain and server. The old domain will remain active for a short while to forward any (less frequent) visitors.
IMPORTANT: Update your bookmarks to

Brodix 4.5 bore spaced 9 degree CNC Heads for sale

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
David Vizard
Posts: 1618
Joined: Thu Jan 15, 2015 12:19 pm

Brodix 4.5 bore spaced 9 degree CNC Heads for sale

Post by David Vizard » Wed Aug 22, 2018 12:10 pm

I have a set of 9°,4.5 inch bore pitch Brodix CNC heads that I have been saving for a serious big inch build. With 2 years of work still in hand I doubt that I will get to use these heads. Other than aligning the edges of the chamber to the bore and finishing up the seats to your own spec these heads are ready to go. Can't remember the exact flow numbers but intake is somewhere around 400 and exhaust is about 245 without pipe. Combustion chamber has been updated to the latest form worth about 20 hp om an engine in the 800 HP range.

Asking $750 for the pair.

Terry Walters at (tel 540-774-8605) is handling the sale and shipping.
You do not have the required permissions to view the files attached to this post.
David Vizard Small Group Performance Seminars - held about every 2 months. My shop or yours. Contact for seminar deails - for details.

Post Reply