Wanted, used parts for homebrew engine "cocktail"

[The Iron Icon]

Looking for any rods for sbf, no matter the length, we can recond in shop.
Lifter with link bar.
Pulley system.
Pistons ranging from 4 to 4.06
And a flywheel.

If you think you might have one of these parts please contact myself or DV.

[Racer71]

Let me check at shop I think I have a set of lifters from my 396 Windsor

[cgarb]

I see in the thread for this that you are thinking of mix matching rods. I have a complete set of 8 scat I beam rods, they are the ones that look like a stock rod with bolt and nut. Only thing is that one rod needs a bushing in the small end. All are 5.400 with a sbc journal and Chevy pin. I would donate these if they can be used.