Started on some EQ iron BBC heads for a Bonniville contestant who has subsequently decided to run a SBC instead.
The R&D ports so far done are showing excellent results and I would like to see these heads used and dyno tested. the good port are at 430 cfm plus and the bad about 5 less. I am willing to finish off the castings complete with valves so I can see dyno results. I expect the final flow #'s will be about 440/435 at about 0.850 lift.
I can let these heads go with a cam to suit for about $1750 but I am willing to consider offers.
DV
BBC iron Bonneville hds
Moderator: Team
-
David Vizard
- Guru
- Posts: 1787
- Joined: Thu Jan 15, 2015 12:19 pm
- Location:
BBC iron Bonneville hds
David Vizard Small Group Performance Seminars - held about every 2 months. My shop or yours. Contact for seminar deails - davidvizardseminar@gmail.com for details.