Page 1 of 1
Looking for quality 4L60E torque converter.
Posted: Sat Mar 21, 2020 3:18 pm
by dfarr67
Looking for a quality-non abused HD 700R4/4L60E torque converter.
SBC gen1/LT NOT LS, for 4x4 would like to retain occasional light towing, lock up, 2100-2500 stall.
Behind a 383cid 222/226,544/544 @112
non billet Hughes, PTC, etc. no TCI, B&M.
davefarr1967@gmail.com
Re: Looking for quality 4L60E torque converter.
Posted: Sat Mar 21, 2020 5:34 pm
by ProPower engines
Where are you located??
Re: Looking for quality 4L60E torque converter.
Posted: Sun Mar 22, 2020 11:06 am
by dfarr67
Hi, Alberta Canada- our dollar and shipping usually kills me.
Re: Looking for quality 4L60E torque converter.
Posted: Sun Mar 22, 2020 6:33 pm
by shoedoos
Re: Looking for quality 4L60E torque converter.
Posted: Sun Mar 22, 2020 7:01 pm
by FuelieNova
To bad your not closer...
I live in Minneapolis and have a nice 2600 stall lockup that is a well built convertor.
I would give it away.
Tom
Re: Looking for quality 4L60E torque converter.
Posted: Sun Mar 22, 2020 7:25 pm
by dfarr67
FuelieNova wrote: ↑Sun Mar 22, 2020 7:01 pm
To bad your not closer...
I live in Minneapolis and have a nice 2600 stall lockup that is a well built convertor.
I would give it away.
Tom
Well, if you can get a ground post online qoute- I am interested.
Re: Looking for quality 4L60E torque converter.
Posted: Thu Mar 26, 2020 6:54 pm
by FuelieNova
Sorry it took a while to respond. I am working 6 days a week and just don't have time to crate up and see how much shipping is. Im normally only home on Sundays.
If anyone else lives in Minneapolis area and needs one, its free.
Tom