Speed-Talk is running on www.Speed-Talk.com

IMPORTANT: Update your bookmarks to https://www.speed-talk.com/forum/
(Right-click the URL and select "Bookmark this link")

WTB, Roller cams

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
User avatar
CamKing
Guru
Guru
Posts: 9617
Joined: Wed Aug 08, 2007 4:05 pm
Location: Denver, NC
Contact:

WTB, Roller cams

Post by CamKing »

Looking for new roller cams for:
360 Chrysler - need something with .370"-.425" Lobe Lift, on a 110-114 LSA
460 BB Ford - need something with .350"-.400" Lobe Lift, on a 112-116 LSA
Mike Jones
Jones Cam Designs

Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Pete1
Member
Member
Posts: 73
Joined: Sun Nov 10, 2013 9:41 pm
Location:

Re: WTB, Roller cams

Post by Pete1 »

Hi Mike,
Not exactly what you want but I thought I would mention it.
I have a steel billet for a 430 Ford with a Schnieder 32R (roller) grind on it. It only has .316 lift but could be reground to something modern.
It has old cosmoline on it and a few very small rust pits, the type of which would clean up at .005 or less.
This has been on the shelf for 40 years.(maybe more) Attached are some pics.
Pete Samuelson
DSC_3885.JPG
DSC_3884.JPG
You do not have the required permissions to view the files attached to this post.
Joe-71
Member
Member
Posts: 183
Joined: Sat Apr 08, 2017 5:46 pm
Location:

Re: WTB, Roller cams

Post by Joe-71 »

Is that for a 430 MEL engine? If so, how much do you want for it? Private message if Mike doesn't want it. Joe-71
Joe-JDC
Post Reply