Page 1 of 1
WTB, Roller cams
Posted: Tue Sep 15, 2020 3:03 pm
by CamKing
Looking for new roller cams for:
360 Chrysler - need something with .370"-.425" Lobe Lift, on a 110-114 LSA
460 BB Ford - need something with .350"-.400" Lobe Lift, on a 112-116 LSA
Re: WTB, Roller cams
Posted: Wed Sep 23, 2020 12:05 am
by Pete1
Hi Mike,
Not exactly what you want but I thought I would mention it.
I have a steel billet for a 430 Ford with a Schnieder 32R (roller) grind on it. It only has .316 lift but could be reground to something modern.
It has old cosmoline on it and a few very small rust pits, the type of which would clean up at .005 or less.
This has been on the shelf for 40 years.(maybe more) Attached are some pics.
Pete Samuelson
DSC_3885.JPG
DSC_3884.JPG
Re: WTB, Roller cams
Posted: Wed Sep 23, 2020 6:25 pm
by Joe-71
Is that for a 430 MEL engine? If so, how much do you want for it? Private message if Mike doesn't want it. Joe-71