wtb 1964-67 v8 factory chevy II front sump oilpan.
Moderator: Team
-
- New Member
- Posts: 48
- Joined: Mon Apr 14, 2008 1:41 am
- Location: nebraska
wtb 1964-67 v8 factory chevy II front sump oilpan.
Looking for a front sump v8 pan for chevy II if anyone has one. Hoping maybe someone converted to the better rear sump pan and still has there original front sump pan they would part with.
Re: wtb 1964-67 v8 factory chevy II front sump oilpan.
you do know that the front sump pan uses a very hard to find special oil pump and screen???
-
- New Member
- Posts: 48
- Joined: Mon Apr 14, 2008 1:41 am
- Location: nebraska
Re: wtb 1964-67 v8 factory chevy II front sump oilpan.
I have seen them pop up on ebay,, are you running a auto or stick???
-
- New Member
- Posts: 48
- Joined: Mon Apr 14, 2008 1:41 am
- Location: nebraska
Re: wtb 1964-67 v8 factory chevy II front sump oilpan.
Stock m20 and and factory shifter . My factory 362 casting 327 block for the 66 nova I have, had to be freshly bored .060 now i have one cylinder #1 sonic tests ,098 on a spot one to two inches down in the bore on the major thrust side so I dont know what to do put it together and cross my fingers or possibly sleeve it and hope it doesnt screw up #3 cylinder roundness.
-
- HotPass
- Posts: 253
- Joined: Sat Jul 10, 2010 3:48 pm
- Location:
Re: wtb 1964-67 v8 factory chevy II front sump oilpan.
Have you tried Joe at Chevy 2 Only?
The pans are reproduced also.
Tom
The pans are reproduced also.
Tom
- af2
- Guru
- Posts: 7014
- Joined: Sun Jan 28, 2007 4:42 pm
- Location: Grass Valley, CA :Northern Foothills
Re: wtb 1964-67 v8 factory chevy II front sump oilpan.
Here you go..
https://gmclassics.com/part/oil-pan-v8- ... -kick-out/
https://gmclassics.com/part/oil-pan-v8- ... -kick-out/
GURU is only a name.
Adam
Adam
-
- New Member
- Posts: 48
- Joined: Mon Apr 14, 2008 1:41 am
- Location: nebraska
Re: wtb 1964-67 v8 factory chevy II front sump oilpan.
Found one on the hamb ,he put a rear sump pan on and had the old original front sump pump and pickup $30.00. Which was fair I thought.
-
- HotPass
- Posts: 253
- Joined: Sat Jul 10, 2010 3:48 pm
- Location: