034 bow tie heads
Posted: Tue Jun 08, 2021 3:21 pm
bowl ported-screw in studs-guide plates-angle milled to 53cc-new valves-valve springs-locks and retainers. had 1 seat replaced with minor combustion chamber nicks. springs are set up for solid flat tappet or hydraulic roller. springs are 1.500. were pressure tested. They were on a 355 with 4412 carb on a 2101 intake. No longer legal. These are the best factory 2 barrel heads i ever dynoed. $800.00 you pay shipping. I live 35 miles from pittsburgh pa. 724 489 9394 walter